ImageWorks Panoramic Dental X-ray Units

ImageWorks Generations of Imaging

For more than 35 years, ImageWorks has been providing the best in imaging solutions to dental health professionals. ImageWorks’ objective is to improve both patient care and practice efficiency by offering solutions that perform at the highest level while seamlessly integrating with your existing technology. ImageWorks understands that technology should conform to the patient, not the other way around.

ImageWorks’ Panoura 18S Dental Panoramic X-ray System


ImageWorks’ Panoura 18S Dental Panoramic X-ray

The Panoura 18S is the most practical advanced 2D dental imaging system. Ideal for doctors who need ultra-high-resolution Panoramic and Ceph capabilities all in one compact, low-cost platform.


Most Panoramic CMOS sensors use lower cost, more generally available materials that are less sensitive to x-ray. Therefore, these sensors must convert x-ray to light before converting to a digital signal. This can result in image blurriness because the extra conversion step can cause the radiation to “fan out” and inadvertently trigger surrounding pixels. The Panoura has a unique sensor design that converts x-ray directly to digital, which contributes to a much sharper image.


How do we create the gorgeous images we’re so well-know for? It’s the 16 bit sensor. A 16 bit sensor has twice as many greyshades that can be presented in each pixel as a 15 bit sensor and four times as many as a 14 bit sensor. In the end, a 16 bit sensor provides fantastic texture and contrast.


Not only do we do create bitewings, but our FMX Clipping feature creates 18 intraoral-sized images clipped from the pan with one click. Instead of taking 18 individual images with an intraoral X-Ray, they can all be generated at once in 14 seconds.


Panoura 18S features auto-correction for suboptimal patient positioning. Without this, an already suboptimal image (from a pan with a lower-quality sensor) can be further degraded if the patient is not positioned optimally. With the Panoura, the very high data-capture sensor acquires many “layers” of image data. This allows the powerful software to auto-correct for suboptimal patient positioning. It’s worth noting that all of this data is available after the image is taken – so the image can be further optimized if desired. In the end, this assures exquisite images with the Panoura every time while being less dependent on operator training or the ability of the patient to remain stationary.


Our basic 2D panoramic unit is upgradeable to 3D, so there is peace of mind that the initial investment is protected if 3D capability is needed later on.


The Panoura’s small footprint makes it an incredibly practical solution for tight offices.



ImageWorks’ Panoura X-era Dental CBCT X-ray System


The sensor used in a Dental CBCT or panoramic system is like the engine of an automobile: the component that defines the system’s performance. You are investing a lot of your hard-earned money in this piece of equipment. Do you know what’s under the hood?

ImageWorks’ Panoura X-era X-ray System


0.2 mm focal spot (smallest in the industry)

16 bit sensor (highest in the industry)

Direct Conversion sensor

Manufactured in Japan

Clip FMX from Panoramic

Easy to Use and a Great Price

Integrates with all Major Software

Multiple Fields of View from 6 cm x 4 cm up to 16 cm x 8 cm

Ideal for all applications including Endo, Implants and Airway

Gorgeous Image quality at all levels

Low dosage mode emits less radiation than a traditional intraoral FMX exam

3D Viewer Screen from ImageWorks’ Panoura X-era X-ray System

Sample Images:

2D Panoramic and Ceph Images in Ultra HD

Direct Conversion Sensor avoids extra transition step that degrades image quality with most panoramic x-ray sensors

TMJ and bitewings

Captures over 50 different panoramic layers in every scan so that even if technique is less than perfect, a fantastic image can be achieved

16 bit sensor creates best-in-class contrast resolution

2D images integrate with most major imaging software platforms

3D images viewed throughout the office

3D volumes are DICOM standard so can easily be imported into most major 3D imaging software, or used with any lab service

3D volume can be converted to STL format

Colleagues can view 3D volumes sent to them even if they have no software other than Windows

Front-viewing patient positioning

Ceph model has option of dedicated ceph sensor

360 degree rotation

Intuitive interface means less training and no mistakes

Simple positioning also enhances patient comfort

Integrates with all Major Software



ImageWorks’ Dental Imaging Software


This image has an empty alt attribute; its file name is Dental-7.jpg
ImageWorks’ EVAsoft Dental Imaging Software

EVAsoft Dental Image Management software meets the imaging demands of today’s digital practices. A sophisticated software that is easy to learn and simple to operate, EVAsoft has all of the advanced features necessary to deliver rapid, effective diagnoses from multiple imaging modalities. Also, whether your practice management is Dentrix, Eaglesoft, OpenDental, or any other major software platform, EVAsoft integrates seamlessly.

EVAsoft Attributes:

  • Easy-to-Use with Simple Tab Navigation
  • Automatic X-Ray Sequence Selection
  • Automatic Image Save Function
  • Endodontic Exposure Mode
  • Decay and Abscess Detection Tool
  • Automatic Image Contrast Enhancement
  • View X-Rays while modifying Practice Management charts
  • Easily send X-Rays to Insurance Companies and Referring Physicians
  • Integrates with All Major Practice Management Software